Dewalt DWE7485 vs Bosch GTS1031 Table Saw Comparison

When it comes to portability, there’s no question that these table saws can be easily transported. If you’re strong enough, you can even carry them around with one hand. But which one is for you? Let’s help answer this question through this Dewalt DWE7485 vs Bosch GTS1031 comparison report.

Comparison Chart: Dewalt DWE7485 vs Bosch GTS1031

Let’s start with this comparison chart.

Table Saw
Model Check Price » Dewalt DWE7485 Check Price » Bosch GTS1031
Weight 46 lbs. 52 lbs.
Amperage 15 15
No Load Speed 5,800 RPM 5,000 RPM
Blade Size 8-1/4″ 10″
Arbor Size 5/8″ 5/8″
Depth of Cut at 45 deg 2-9/16 in. 2-1/4 in.
Rip Capacity 24.5 in. 18 in.
Miter Gauge
Push Stick
Metal Roll Cage
Storage
Switch Lock

Key Differences: Dewalt DWE7485 vs Bosch GTS1031

Here, we list down the differences between these two table saws.

Blade Size

The most important difference between the Dewalt DWE7485 and the Bosch GTS1031 is their blade size. The GTS1031 is a 10-inch table saw while the DWE7485 uses an 8-1/2-inch blade.

Weight

The Dewalt DWE7485 is lighter than the GTS1031 by 6 lbs. It weighs 46 lbs. In comparison, the GTS1031 weighs 52 lbs.

No Load Speed

The Dewalt DWE7485 has been given a better no-load speed rating, which is 5,800 RPM. The GTS1031 on the other hand has a max no-load speed of 5,000.

Also Read: Dewalt DW089LG vs Bosch GLL3-330CG Key Specs and Features Comparison

Depth of Cut at 45 deg

Based on the data we’ve gathered, the Dewalt DWE7485 has a better depth of cut given a 45-degree angle.

Rip Capacity

Dewalt DWE7485’s rip capacity of 24.5 inches is larger than the GTS1031’s 18 inches.

Also Read: Evolution R255SMS vs R255SMS+: Which Miter Saw to Buy?

Our Final Word: Dewalt DWE7485 vs Bosch GTS1031

Which one has better features? Even though the Dewalt DWE7485 makes use of a smaller blade, it has better features overall.

Skilsaw SPT99-12 vs Dewalt DWE7491RS Key Differences

The main selling point of these table saws is their portability. Both come with a stand that makes transfer easy and convenient. But what’s the difference? Find out in this Skilsaw SPT99-12 vs Dewalt DWE7491RS comparison report.

Comparison Chart: Skilsaw SPT99-12 vs Dewalt DWE7491RS

Let’s start with this chart.

Table Saw with Stand
Brand and Model Check Price » Skilsaw SPT99-12 Check Price » Dewalt DWE7491RS
Weight 98.8 lbs. 90 lbs.
Amperage 15 15
Arbor Size 5/8″ 5/8″
Blade Size 10″ 10″
Max No-Load Speed 5,000 4,800
Table Material Aluminum Aluminum
Fence Rack & Pinion Rack & Pinion
Depth of Cut at 90 deg 3-5/8″ 3-1/8″
Depth of Cut at 45 deg 2-3/10″ 2-1/4″
Maximum Dado Width 0.5″ 13/16″
Rip Capacity Right 30-1/2″ 32-1/2″
Bevel Angle -1° to 46° 0° to 45°

Key Differences: Skilsaw SPT99-12 vs Dewalt DWE7491RS

Here are the main differences between these two table saws with stand.

Rolling Table Stand

When it comes to their table stand, the Skilsaw SPT99-12 wins. First, it has a pair of 16-inch wheels, which is larger than the Dewalt’s. Second, transport of the table saw entails only one step – lift the other end opposite the wheels, and then go.

Weight

Overall, the Dewalt DWE7491RS weighs less than the Skilsaw. It weighs 90 lbs., which is about 9 lbs. less than the Skilsaw.

Also Read: Skilsaw SPT99T-01 vs Dewalt DWE7485 Key Specs and Features Comparison

No-Load Speed

The Skilsaw SPT99-12 wins here. According to the data we’ve gathered, it was given a no-load speed rating of 5,000. In comparison, the Dewalt has a rating of 4,800 RPM.

Depth of Cut

The Skilsaw SPT99-12 gains an advantage when it comes to depth of cut at both 45 and 90 degree angles.

Also Read: WEN 6552t vs Dewalt 735 Comparison Report

Our Final Word: Skilsaw SPT99-12 vs Dewalt DWE7491RS

Between these two table saws, the Skilsaw SPT99-12 has better features overall, based on the data we’ve gathered. It has a stand that’s easier to use, it has a better no-load speed rating, and it has a better depth of cut.

Skilsaw SPT99T-01 vs Dewalt DWE7485 Key Specs and Features Comparison

The Skilsaw SPT99T-01 is advertised to have a “legendary worm drive gearing” while the Dewalt DWE7485 is “guaranteed tough.” Which one of these is for you? Let’s help you answer this question through this Skilsaw SPT99T-01 vs Dewalt DWE7485 comparison report.

Comparison Chart: Skilsaw SPT99T-01 vs Dewalt DWE7485

Let’s start with this chart.

Table Saw
Model Check Price » Skilsaw SPT99T-01 Check Price » Dewalt DWE7485
Weight 44 lbs. 46 lbs.
Amperage 15 15
No Load Speed 5,300 RPM 5,800 RPM
Length 23.2 in. 22.75 in.
Height 13 in. 13 in.
Blade Size 8-1/4″ 8-1/4″
Arbor Size 5/8″ 5/8″
Depth of Cut at 45 deg 1-7/8 in. 2-9/16 in.
Rip Capacity Right 25 in. 24.5 in.
Dust Collection Port
Anti-Kickback Device
Miter Gauge
Push Stick
Metal Roll Cage
On-Board Storage
Switch Lock
Rack and Pinion Fence System
Special Features Dual-Field™ Motor, Worm Drive Gearing Site-Pro Modular Guarding System

Key Differences: Skilsaw SPT99T-01 vs Dewalt DWE7485

Here, we list down the differences between these two table saws.

Weight

The Dewalt DWE7485 is heavier by 2 lbs. It weighs 46 lbs. In comparison, the Skilsaw SPT99T-01 weighs 44 lbs.

No Load Speed

Between the two, it’s the Dewalt DWE7485 that has a better no-load speed rating at 5,800 RPM. In comparison, the SPT99T-01 has a maximum RPM of 5,000. Theoretically, the Dewalt cuts faster than the Skilsaw.

Depth of Cut at 45 degrees

Based on the data we’ve gathered, the Dewalt DWE7485 can cut deeper at 45 degrees.

Also Read: Milwaukee 2720-20 vs 2722-20: Which Has Better Features?

DeWalt DWE7485 vs DW745 Table Saw Comparison Report

DeWalt DWE7485 vs DW745… what’s the difference between these two compact table saws? Their blade diameter, first and foremost. One is an 8.24″ table saw, and the other is equipped with a 10-inch blade. Read along to find out more.

Comparison Chart: DeWalt DWE7485 vs DW745

Let’s start with this comparison chart.

Table Saw
Model Check Price » DeWalt DWE7485 Check Price » DeWalt DW745
Amps 15.0 15.0
Blade Diameter 8-1/4″ 10″
Depth of Cut at 90 Degrees 2-9/16″ 3-1/8″
Depth of Cut at 45 Degrees 1-3/4″ 2-1/4″
Dust Port Diameter 2.5″ 2.5″
Weight 46 lbs. 45 lbs.
No-Load Speed 5,800 RPM 3,850 RPM
Rip Capacity 24-1/2″ 20″
Rack-and-Pinion Fence Rails
On-Board Storage
Site-Pro Modular Guarding Systm
Metal / Steel Roll Cage
Includes a Push Stick
Includes a Miter Gauge
Includes Anti-Kickback Pawls
Includes a Blade
Includes a Blade Guard
Includes Blade-Change Wrenches
Includes a Non-Through Cut Riving Knife
Inclues a Fence

Key Differences

Here, we highlight these table saws’ differences.

Blade Diameter and Cutting Depth

The DeWalt DW745 is a 10-inch jobsite table saw, considered a standard size. The DWE7485, on the other hand, comes with a smaller, 8-1/4 blade.

Being the one with the larger blade, the DeWalt DW745 can cut thicker boards. According to data, it has a max cutting depth of 3-1/8″ at 90 degrees. In comparison, the DWE7485 can cut up to 2-9/16″.

Rip Capacity

The DeWalt DWE7485 has a maximum rip capacity of 24.5 inches, which is more than the capacity of the DW745.

Weight

The DeWalt DW745 is lighter by 1 lb. It weighs 45 lbs.

Also Read: Triton MOF001 vs JOF001 Plunge Router Comparison Report

No-Load Speed

The DeWalt DWE7485 wins in this area. It has a no-load speed of 5,800 RPM. In comparison, the DW745 has an RPM rating of 3,850.

Included Items

Overall, you’ll get more freebies if you buy a DeWalt DWE7485. Some items that you’ll get that you won’t with the DW745 include anti-kickback pawls, blade-change wrenches, riving knife, and a fence.

Also Read: Makita LS1221 vs LS1040 Full Comparison Report

Our Final Word: DeWalt DWE7485 vs DW745

The DeWalt DW745 can cut thicker materials, but the DeWalt DWE7485 has a better rip capacity. The DW745 may be lighter by 1 lb., but the DWE7485’s blade turns faster with a speed of 5,800 RPM.