The Skilsaw SPT99T-01 is advertised to have a “legendary worm drive gearing” while the Dewalt DWE7485 is “guaranteed tough.” Which one of these is for you? Let’s help you answer this question through this Skilsaw SPT99T-01 vs Dewalt DWE7485 comparison report.
Comparison Chart: Skilsaw SPT99T-01 vs Dewalt DWE7485
Let’s start with this chart.
|Model||Check Price » Skilsaw SPT99T-01||Check Price » Dewalt DWE7485|
|Weight||44 lbs.||46 lbs.|
|No Load Speed||5,300 RPM||5,800 RPM|
|Length||23.2 in.||22.75 in.|
|Height||13 in.||13 in.|
|Depth of Cut at 45 deg||1-7/8 in.||2-9/16 in.|
|Rip Capacity Right||25 in.||24.5 in.|
|Dust Collection Port||✅||✅|
|Metal Roll Cage||✅||✅|
|Rack and Pinion Fence System||✅||✅|
|Special Features||Dual-Field™ Motor, Worm Drive Gearing||Site-Pro Modular Guarding System|
Key Differences: Skilsaw SPT99T-01 vs Dewalt DWE7485
Here, we list down the differences between these two table saws.
The Dewalt DWE7485 is heavier by 2 lbs. It weighs 46 lbs. In comparison, the Skilsaw SPT99T-01 weighs 44 lbs.
No Load Speed
Between the two, it’s the Dewalt DWE7485 that has a better no-load speed rating at 5,800 RPM. In comparison, the SPT99T-01 has a maximum RPM of 5,000. Theoretically, the Dewalt cuts faster than the Skilsaw.
Depth of Cut at 45 degrees
Based on the data we’ve gathered, the Dewalt DWE7485 can cut deeper at 45 degrees.